11 Methods To Refresh Your Double Glazing Door Lock Repairs
11 Methods To Refresh Your Double Glazing Door Lock Repairs
Blog Article
Double Glazing Door Lock Repairs
Have your uPVC window or door mechanism started to fail? Perhaps the handles on your uPVC windows and doors aren't aligned properly or are difficult to use.
It's important that the double glazed doors function smoothly, or else you'll be wasting energy and increase the chances of burglary. Owen the Locksmith can fix your door lock for an affordable price.
Snapped Key
If a key is snapped off in a lock, it can be extremely annoying. It also poses a security risk since the door may not lock and make you vulnerable to burglars. There are a few easy solutions you can use to resolve the issue and make your door work again.
The first step is to remain calm. If you panic, you could end up pushing the broken key further into the lock.
Spray WD-40, or another penetrating lubricant, into the lock. This will allow the broken piece to be removed more easily. You can also use a screwdriver to help break up any stuck pieces that could be blocking the way. If you have a chunk of the key that's stuck then grab it using a paperclip or other thin metal object and pull it. Both methods work, but be careful not to push the damaged key further into the keyway.
Some paperclips have grooved edges, which can be used as a hook extractor, and some Jigsaw blades also work for this use. If you don't happen to have any of these items then you can bend a hook using needle-nosed pliers. Also, a pair tweezers is a good way to grasp and pull out the remaining bit of the broken key.
If you are unable to remove the broken key piece, use a lock deicer. This is usually found in most hardware stores. It works by freezing any moisture or ice that might be in the lock.
If none of these tricks seem to be helping you, it's time to call in a locksmith. Fitlocks experts can fix problems such as broken handles and snapped keys with uPVC locks and door mechanisms. They can also modify your double glazing door mechanisms to make them more user-friendly. You can book an appointment online for a double-glazing repair or contact us to discuss your needs.
Broken Cylinder
A broken cylinder can be a serious security risk. Luckily, it's an easy repair for a professional locksmith to complete. A locksmith will have to tap the cylinder to fix it. This can be done using a hammer, or any other tool. However, the most effective method is to use a wire or a long match. The match or wire's end in the keyway. After that, the locksmith will hit the lock to break it open. This is far better than using a hammer, which could damage the lock.
Overheating is the main reason behind cylinder heads cracking. This can occur when the block and the cylinder head are made from different metals like cast-iron and aluminum. Different metals will heat up and cool off at different rates. This can cause localised hotspots to expand quicker than the rest of the cylinder.
Another possible cause of cylinder cracks is corrosion. If the head and block of a cylinder are not maintained in a timely manner they could corrosion or rust and cause them to expand faster than expected. This can cause cracks as time passes.
If your uPVC window or door lock is stiff or requires lots of pressure to turn, it can be caused by a number of things. This problem can be caused by a faulty locking mechanism, more info or misalignment or a worn-out handle.
Fortunately it is a simple and cost-effective fix for the majority of double glazing owners. A professional locksmith will typically be able to resolve the issue within an hour of arriving at your home. They can repair the locking mechanisms, or replace the window handles and change the gearboxes, depending on your specific needs. A professional locksmith will be able to advise you of the most cost-effective option for your home. They can even suggest upgrades to high-security 3 Star TS007 euro cylinders that will provide an extra layer of security against burglars. This is a small cost to pay for the security that comes from knowing your uPVC doors are secure.
Broken Handle
Window handle locks are complex mechanisms that wear out with time and use, so it's no surprise that they can break. If yours breaks, it can be difficult to identify the cause of the problem and make sure you fix it properly.
Whether the problem is in the internal locking mechanism or the latch, fixing your broken handle will improve your uPVC double glazing door's security and help you to stop drafts. Incorrectly repairing or replacing the handle could be expensive and could damage the door's frame and lock, so it's worth taking some time to make sure you do it correctly.
With the window in the open position and the window open, loosen the screw that holds the handle with a screwdriver. The screw should be on the inside of the backplate, usually covered by an eye-catching cap to replacement double glazing units near me conceal it for aesthetic purposes. Be careful not to damage any of the internal components inside the handle, like the plates or levers on the opposite side of the spindle. Ideally, keep them in the same place so you can replace them in the event of a need.
Then, rotate the handle until it's 90 degrees towards the window frame. Then, loosen the screw on the back of the handle double glazed windows near me that holds it to the internal spindle using a second screwdriver. Once this is removed, you should be in a position to pull the handle off and take out the broken spindle. Replace it with a new spindle, making sure it's the same length (you can buy them on the internet or at hardware stores). Securely screw it in the correct position. Be careful not to overtighten as this could damage the handle or the window frame.
Close the handle and try it. It is likely that it will operate smoothly and you'll be able unlock your window.
While you're working on the handle, make sure to ensure that your uPVC windows are closing properly. If they don't close correctly, you could encounter damp or draughts in your home. It could also affect the energy efficiency of your home. Core Sash Windows is a local window company that can adjust the hinges of the frames of your windows to ensure they close properly.
Broken Spindle
It is more typical for the spindle to break rather than the handle. This is particularly common with uPVC tilt-and-turn windows. These windows require a handle that acts as a locking device in the window frame. The handle is attached a central rod that activates a series of mushroom-shaped locking cams that lock into the window frame keep. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle has been damaged, this can be an extremely frustrating issue.
Fortunately there are steps that can be taken to fix this problem. A professional locksmith can quickly and effectively fix this issue. They will be able to take apart the window handle using a tool that can remove the wheel component of the mechanism that is where the spindle goes. This is done without damage to the handle or window frame.
After removing the wheel, the technician can inspect the spindle and determine the cause of the break. This involves breaking the spindle into its component parts and meticulously noting their general condition, as well as any particular areas of wear or damage. The process is done in a clean room by highly skilled technicians.
The next step is to clean the damaged spindle. This here will remove any debris or dirt that might be hindering its normal operation. After this, the spindle can be repaired or replaced. If the technician is replacing the spindle, it is possible to use a dowel that is the same size to the original. Then, he will drill holes that are identical to both pieces. This will ensure that the spindle fits perfectly with the handle.
If the damaged spindle can't be repaired, it could require replacement. Home centers can sell generic replacements but if the window style is rare then you'll need to contact an expert in double glazing repair near me cabinet making or woodworking who can replicate the exact part. Once the new spindle is in place it can be fitted to the handle by lining up the holes for screws in the handle with the frame's existing screws. Once the new handle is installed, you are now ready to operate your uPVC window.